When you do a monthly maintainability of your garage door opener then it will be working efficiently and smooth for many years to come. It will also help you be free of trouble operation every time. It is the largest part that is moving in your home. It will be used multiple times before the day ends at any time and throughout all the seasons of the year. The best thing is to have time so that you can perform preventive measures and care of your garage door opener.
Here are methods that you can use so that you can prevent garage door opener troubles in your home:
Look and listen
Ensure that you see visually its action every time you are using it. It is the most important thing to start as a prevention measure. Is the door moving slowly or have jerky in some places? Does the door make grinding noises or it operates silently? You can also check whether both system sides are symmetrical or asymmetrical.
Tightening Hardware up
The average time a garage door moves from top to bottom per year is thousand times. That becomes a lot of vibrations and movements and causes the hardware to become lose every time. All you have to do is to examine your garage door and then you tighten any loose bolts and roller brackets using a socket wrench.
Test the balance
If the door is not well balanced, then the opener will be forced to work hard and will not last for long. Pull release handle so that you can be able to disconnect the opener. Then you move door halfway up manually and if it won’t be able to stay put then there is an imbalance with the counterweight system. Garage door adjusting springs will demand a professional to handle that.
You can inspect the rollers whether they are nylon or steel twice a year. They should be replaced at least after every seven years or less in case you use your garage door many times before the day ends. If they are worn out, cracked or chipped then they need to be replaced possibly very soon. You will do this by reinstalling after removing installed roller brackets that are not directly attached to system cable.
When you find that the rubber seal strip that is in the bottom of the garage door is cracked or brittle then you will be forced to replace it. Weatherstripping can be found at home improvement stores and hardware that are near your location. you will cut the size and then insert it into grooves using the wide angle of the flange that is inside the door.
Lubricate moving parts
Ensure you keep always the garage door parts greased and it will add years of operation for your system. You will use white lithium grease on screws and openers chain, then you spray lubricant that is available. It will help to coat overhead springs.
when you are checking don’t ever tinker using high-tension cables that are used to lift your door because the force they have can maim and kill you. All you will need to do is to check their conditions and know when to look for a profession to repair them. Keep checking broken strands and then also check damages that are near at the bottom roller bracket.
Test Auto-Reverse safety characteristics
There are two mechanisms that need to be tested, that is photocell and mechanical. So that you can test mechanical feature, put a piece of brick or wood on the ground that is in the path of the garage doorway. If the door is coming and then it touches the brick or wood then it will reverse its direction and move back again. When testing photoelectric system, use beams on each side, you can close the door then pass your leg in the path of the door. The door should reverse.
If your opener is too old for 20 years then it might end up lacking these basic safety measures and it becomes a time now to purchase new garage door opener.
Clearing the tracks
If your garage door tracks have accumulated oil/grease or dirt then use disc brake cleaner to clean it. You can also ensure always that tracks that are on both sides of the garage door are debris free. If you become so inclined then look for a level so that to check the plumb. If there will be a major adjustment, then ensure that it is done by a pro who is a garage door technician.
Grooming garage door
You may have done the examination on safety garage door but don’t forget the door itself. If the door is made of the wood material, then it will require being checked for wrap and water damage. You can also check peeling and chipped points. If you have used steel garage door, they get rust spots and they will demand sanding, priming and then paint. Ensure that you wash the garage door regularly to keep it clean in most cases like you do to your car door.
It is better not to forget that garage doors are one-third of your house extension, and you have to ensure that it is clean and fresh. If you are busy and lack time to check your garage door then look for a technician for the service so that he can fix it.